Paper flowers are an original decoration and a cute addition to any gift. Origami fans know many ways to create stunning bouquets from simple sheets of paper. But not everyone will be able and willing to understand difficult schemes. Therefore, below will be shown simple ways to make a spectacular rose out of paper using the very minimum of items.
Simple rose made of colored paper
For work you will need:
- dry twigs of deciduous trees;
- paper glue (PVA is best);
- colored paper, preferably double-sided, of sufficient density;
- scissors;
- pencil.
How to make a rose out of paper according to this scheme? You need to cut a circle out of red, white or pink colored paper. Perfect evenness is not required - on the contrary, it is better not to use a compass. A spiral is drawn on the circle, and the circle is then cut in a spiral.
You will get a paper tape that needs to be rolled up. It is wrapped from the outer end. It is better to form a bud slowly, you can use glue so that it does not crumble.
The finished rose is pierced in the middle and planted on a twig. To make the craft look more elegant, you can wrap the branches in green paper in advance. Thus, at home, you can even make a small bouquet of roses.
Realistic fluffy rose made of corrugated paper
For this to work, you need:
- corrugated paper;
- duct tape (known to florists as type tape);
- glue;
- scissors;
- wire.
For a good hold of the petals, it is best to find a type tape (green). It is a narrow strip with a weak adhesive ability, often used to create paper bouquets.
It is quite simple to make such a rose out of corrugated paper. First, as in the picture, cut out 14-17 petals that are heart-shaped, as well as 4-6 smaller petals that have a droplet shape. It is important to make sure that the scissors go in the direction of the paper strips, not against them.
Wrap the thick wire with tape. If no such tape is found, you can cut a thin 13 mm strip from corrugated paper and lightly coat it with glue.
Gently stretch each of the petals, from the middle to its edges. Bend the edges with a pencil, toothpick.
Stretching the leaves:
We bend the edges at the leaves like this:
As a result, you get leaves of two types:
Start collecting the flower - start by attaching teardrop-shaped petals.
Use tape tape to attach each to the stem.
Then comes the turn of the larger heart-shaped petals.
The sepal is attached last around the base of the flower.
Attach flower leaves to separate pieces of wire:
Then, from the base of the sheet, we wrap the entire piece of wire with a green type-tape, so that it looks like a stem.
We attach the stems with leaves to the main stem with a bud.
You can bend the stems with leaves a little for realism and your rose is ready.
Decorative rose from napkin
If you want to surprise someone, but you do not have not only paper, but also extra time, then your option is to make a rose from a napkin. A simple rose according to this scheme is made without glue. The course of action is as follows:
- Unfold the napkin and hold it in front of you. In a straight line, you need to bend a few centimeters from above.
- The upper left corner should be clamped between the middle and forefinger.
- Take the upper right corner with your right hand. Now you need to, acting with your right hand away from yourself, wrap the napkin around two fingers on your left hand. When viewed from above, turn counterclockwise. The folded edge will be on the outside.
- Finish wrapping the napkin when the tube is complete. Now the corner on the outer edge of the napkin must be bent to form a triangle. This will be the outermost petal.
- With your right hand, you need to squeeze the napkin under the middle and index fingers (one-fourth the length). Above the clamping point will be the napkin rose itself (its bud), and below - the stem with the leaf.
- Under the place of compression, you need to twist the napkin to make the stem. In the middle of twisting, you need to pull out the free end and make a leaf out of it, and then twist it again.
In this video, you can see the diagram in more detail.
Good afternoon, dear needlewomen!
How often do we ask ourselves the question: "What to give mom, grandmother, teacher on March 8?" We have already offered you some options interesting gifts do it yourself, for example. Now let's try to make a rose out of corrugated paper do it yourself. It does not take much time. And the gift will remain for a long time, will not wither, will not dry out from the frost. By the way, the most important thing is that this will remind the addressee for a long time about your kind and special attitude towards him, because such a gift will contain a piece of your warmth, your soul.
So, in this article you will find a description of how to make a rose from corrugated paper with your own hands in stages, we will also consolidate knowledge with the help of a video.
DIY corrugated paper roses
In order to make a flower from corrugated paper, we need:
- Corrugated paper
- Wire
- Scissors
- Paper roll
- Decorative ribbon for decorating a bouquet
We cut corrugated paper rectangles, these are the future petals of our rose. The more rectangles there are, the more magnificent the flower will turn out.
After that, we put the rectangles all together so that the petals are the same and we form them with scissors.
So, we cut out the same rose petals from corrugated paper.
Let's start giving the rose petals a realistic look. To do this, we wind each petal individually on a tube.
The top of the petal is rounded. Now we put our fingers in this way in the middle of the petal and stretch the paper a little in different directions.
This is how we stretched the petal.
We do this with each rose petal. Now we need to make a corrugated paper base for the rose. To do this, you need to take the wire and bend its edge as shown in the photo. We will glue the petals on this edge.
To do this, glue each petal with PVA glue.
It will be enough to apply three thin strips of glue from below.
And we attach the petal to the wire.
So, the first brick, the base of the corrugated paper flower, is laid.
We do the same with the second petal.
We tie it to the first, forming a rose from corrugated paper with our own hands.
We already have two petals.
The more petals you tie to the base, the more magnificent it will be. The first petals are the foundation, they should not be too open.
The closer the completion of the formation of the rose, the more magnificently we glue the petals.
We glue the petals a little lower each time.
So, our corrugated paper rose is ready. You can now wrap the wire with thread or green corrugated paper, but in this case we will not do this, since the wire will hide in the bouquet and disguise itself under the wrapper.
Corrugated paper bouquet
After we make an odd number of roses from corrugated paper, let's start forming the bouquet. To do this, take a piece of corrugated paper.
Gather the edges of the paper for the bouquet a little.
This is the basis for a corrugated paper bouquet.
We wrap a bouquet of roses in a corrugated paper wrapper.
Crumple the paper a little in the area of the stems of the bouquet.
Tie a ribbon on a corrugated paper bouquet. Ours is ready gorgeous bouquet of roses with your own hands!
Such a bouquet will delight the eyes of its owner for a long time! Do you understand how quickly, cheaply and beautifully you can make a bouquet of corrugated paper with your own hands? By the way, in our previous article you can find out how we made This option is also delicious!
Also watch the video master class
Video: How to make roses from corrugated paper
The text was prepared by: Veronica
Paper flowers are an excellent decoration element and adornment of any gift. However, complex methods of creating bouquets are not suitable for everyone. Many novice needlewomen are interested in the question: how to make a rose out of paper with your own hands? By following the instructions below, you can create your own jewelry.
We make a rose out of paper with our own hands
The instructions below will let you know how to make a rose out of paper easily, spending a minimum of time.
Simple rose
To create a rose, you need to prepare a sheet of red paper, glue and scissors:
By pattern
After reading the following instructions, you will learn how to make a paper rose in stages as a decorative element. For work, you need to prepare sheets of paper in red and yellow, scissors and glue:
Corrugated paper roses
Roses made from corrugated paper look attractive. To create you need to take red and green paper, wire and glue. To make the rose lush, it is better to make 4 flowers:
Vintage roses
A vintage rose is an interesting option. If you want to know how to make a rose out of paper, the photo instruction will be useful. You need to prepare corrugated and thick patterned paper, double-sided tape, glue and scissors:
Yellow rose
To make such a rose, you need yellow paper, glue and scissors:
Lush roses from napkins
To make a lush rose, you need to take napkins of red and whole color. You need to hold a red napkin in front of you and fold a small part on top. The upper corner on the left is clamped between the middle and forefinger. The opposite corner is taken with the other hand and the napkin is rolled counterclockwise.
The resulting tube is pressed a little and a bud is obtained. Then you need to wrap a tube from a green napkin to create a stem. The result is a beautiful rose.
Additional decorations for the rose
Having learned how to make a rose out of paper for beginners, you should make sure that it has additional decorations. Beautiful baskets made of paper or other materials would be an excellent option. You can create a bouquet of roses by complementing it with other paper flowers, candies, etc.
You can surprise a girl, friends or guests with paper crafts. Paper flowers will decorate any gift or feast. Choose your option from the ones offered here.
Making paper crafts is an affordable and fun activity. Paper imitation sometimes resembles natural things so much, it's just amazing. For example, some people know how to make a rose out of paper, but not everyone can create it as much as possible like a living rose.
You can make paper roses yourself, attract children as assistants, or even do this with friends. This will certainly be appreciated by the surrounding women. The instructions below will help you get things done.
How to make a rose out of colored paper
This method is very simple. You only need paper suitable color, stationery scissors and glue. You can show your imagination and paint the most ordinary white sheet with paints, felt-tip pens and so on, so that you end up with a truly unique decoration.
Draw a 10 cm square on a piece of paper. Draw a spiral inside the square by hand. Using scissors, carefully cut the spiral to form a strip of even width. Start rolling the rose, starting from the outer end of the spiral. In the process of twisting, glue the turns to each other at the base of the rose, trying to twist the flower as tightly as possible. The finished rose can be supplemented with leaves of a different color. Use any stick or twig as the stem for the rose.
How to make a rose from a napkin
Decorate festive table or you can surprise your friends at a cafe table, if. All you need is a napkin and your own hands. Recommendation: The napkin should be one-layer and of a suitable color, preferably pink.
Bend a strip about 5 cm wide along one edge of the napkin and grasp it with two fingers, holding the napkin between them. Gently wrap the napkin around your fingers along the entire remaining width to form a tube. About a third of the height of the tube from the top, begin to twist it, forming a dense stem. Twisting the stem about half its length, fold the bottom edge of the napkin up. It will be a piece of paper. Continue twisting the stem all the way to the end.
Tip: so that the rose does not unwind, give it strength with regular hairspray.
Satin ribbon rose
There are different ways to make a satin rose. Let's consider the simplest one. You will need a needle and thread to match the ribbon, scissors and the ribbon itself. A narrow ribbon for one flower will require no more than a meter, and a wide one (6 cm) - already more, about one and a half meters.
Start work from one edge of the tape. The end must be bent at an angle of 45 degrees, and secured with thread. We sew stitches along one side of the tape along its entire length. Pulling the end of the thread, lightly gather the tape. We wrap it around the bent tip, forming petals. To give the flower strength, we sew through stitches through the entire flower. At the end of the work, we hide the tip of the tape at the base of the flower.
Corrugated rose
Corrugated paper allows you to create roses that are very similar to real natural flowers. There are several popular techniques for making roses. When choosing a method, you should focus on the availability of free time and available materials.
For one flower you will need:
- Corrugated sheets in two colors - for the petals and for the leaves.
- The basis for the stem is a stick, twig, wire.
- Glue or electrical tape.
Cut out the petals. Each corrugated petal can be cut individually, or you can use more in a simple way: Fold the paper in 4 or 8 layers and cut the petals along the pre-drawn outline. Twist the tip of each petal as tightly as possible, giving the petal volume. We wind a green strip around the base of the stalk, and then attach the leaves to it. We attach all the resulting petals to the upper end of the stem. You can fix it with glue if the flower is small, or with an insulating tape of a suitable color if the rose is large. A little glitter or beads glued to the edge of the petals will give the flower a very festive and festive look.
By choosing a certain method, and with a little practice, you can make wonderful jewelry with your own hands. A paper flower will decorate a festive table, interior, dress, hat, and so on.
A master class will help you learn how to make very beautiful roses from corrugated paper:
Such interesting crafts like corrugated paper roses, can not only serve as entertainment for lessons children's creativity, but also, provided that they are made accurately and efficiently, serve as an excellent decoration for the interior. In fact, there are a lot of options for using paper flowers, moreover, these are not only obvious examples with Easter or wedding decoration, but they are also taken for compilation. In particular, small bouquets of roses with delicious chocolates hidden inside are not only a decoration, but also a wonderful gift for New Year for any woman.
DIY corrugated paper roses
Our today's material will be entirely devoted to the options for master classes on do it yourself corrugated paper roses... In most examples, you will see stemmed flowers used for vase compositions, but almost any example can be used for other purposes as well. For example, a lot can be seen when a screen is created with the help of flowers behind the place of the newlyweds or a photo zone is formed by them. In this case, you may not make a stem and leaves for each flower, but only make sepals and combine them into one large panel with glue or small pieces of double-sided tape.
In addition, roses can serve as a decor in an unconventional form in an apartment. So, pink garlands can become part of festive events, woven into wreaths for doors, hang from chandeliers, frame frames of mirrors, paintings and photographs. As a material, corrugated paper is very easy to use, and the result of the work is very similar to a real flower precisely due to the peculiarities of the ornamental material.
The only thing to remember if you want to do everyday or - they should be looked after. Since it will not work to wash the paper, it is better to either shake out the dust from the roses, or wipe it with a cloth, a special brush, since dust accumulates perfectly on the paper surface.
Actually, after all the advice and recommendations, we smoothly move on to examples of creating roses from corrugated paper with hands. Master-the class you see above is a classic for this kind of craft and you need to start by forming the petals of the correct shape. There are two types of petal shapes and the choice depends a lot on the way they are connected. If you want to form a flower only from petals, without additionally twisting the middle, then it is better to choose the template that is shown in the photo. It is he who will allow both to qualitatively fix them below, and to get the necessary appearance bud. Such parts are usually made in an odd number, and they are staggered. The bud is fixed with ordinary strong threads, matched to the color of the material (it can also be additionally fixed with a drop of glue for reliability), and then decorated with green sepal details on top. At this point, the work can be completed (for the purposes that we talked about above), or you can also add a stem wrapped in a green strip and leaves.
How to make a rose from corrugated paper
Not only a gift or decor for an apartment, but also the necessary props for an interesting photo shoot - this is how you can use the royal flower. Therefore, this section is dedicated to master classes, how to make a rose from corrugated paper, the size of which will be slightly larger than we are used to seeing in bouquets. Such a large craft is usually used alone, so it is important not only to make it very beautiful, but also to provide it with a securely attached stem for which it will be convenient for you to hold it.
Since the petals will be large enough, it makes no sense to make them just oval, otherwise you will need a lot of them. But if you choose the shape of a heart, then 9-11 pieces will be enough. For more convenience in cutting from a template, take several large rectangles, fold them in a stack, and at the top, fasten a white sheet with a heart-shaped template. You can secure the entire stack with paper clips or staples for easier cutting. When you have the blanks, you need to give them all the necessary bends, which create its special appearance for the rose. You need to take each heart with your hands and stretch it in the middle, as far as the paper allows. In general, it is stretching that has earned the fame of the corrugated surface, since it allows you to give crafts the desired shape. To learn this, in particular, do corrugated paper roses - video Petal shaping lessons can be useful to you.
In addition, each petal must be twisted inward using a pencil or a rod from a pen. Then we attach the first element to the pre-formed stem, fix it with glue. We continue to put the petals on top of each other, wrapping around the stem axis. In the end, all that remains is to form a calyx and attach a few leaves to the stem. Due to the fact that the stem does not turn around from the very edge, but its whole quarter is hidden inside the bud, it will be very convenient to carry it in the hand and use it for photographing, the flower will not crumble and will not fly off the stem.
Another lesson that concerns specifically large varieties of these is in the photo above. For one bud, you will need two detail shapes - a heart and an oval. At first, the bud is formed with the help of oval details, and then on top it is supplemented with heart-shaped ones, which create the effect of splendor that we need in this case.
Corrugated paper rose step by step
Gradually collecting elements into a bud is a difficult and painstaking task, fortunately, there are also no less worthy-looking options for creating lessons corrugated paper roses step by step, which would not be assembled separately, but curled up.
In the first case, the paper tape is given the shape necessary for the craft using a system of pins. Any housewife who loves to bake elegant pies with decorations or make an unusual shape of dumplings knows this technique. It is necessary to wrap the edge of the tape in such a way as to create a raised wavy edge on it. This option is good if you have a small amount of time and do not know how quickly and effectively enough. So, you already understood the first stage - you need to cut the tape of the required length (the longer it is, the more magnificent your flower will end up) and make tucks on its upper edge, the corrugated surface will easily keep the given shape.
When the whole ribbon is ready, you can start rolling it into a whole roll to get the buds of the correct shape. The lower part must be clamped with a wire loop. Moreover, this same wire will be a stem for us, you just need to wrap it in green material. A little cute nuance - to make the flowers look like an English variety of the variety, provide them with small petals that are fixed under the sepal, as shown in the photo, so that the plants even more resemble living ones. Use similar decorative elements for a task, an apartment, a matinee hall, a nursery, and so on.
In addition, you can also make the classic look of a flower using the twisting technique, only this time the shape is given not by folding the edges, but with the help of scissors. Let's remember how the popular one is made - a paper garland and in the same technique we will make our craft. When you unfold the garland, you need to bend the edges of the petals with a knitting needle, and twist the bases with thin flagella, so that it is easy to give the desired look the first time, and it was easy to attach twisted wire to the resulting fastener in the lower part of the inflorescence. It remains only to decorate the resulting stalk. By the way, it is the flexible wire that will allow you to combine such flowers into wreaths and compositions.
Corrugated paper roses with sweets
New Year's and often make a wonderful connection beautiful bouquet and a small souvenir, such as candy, hidden in the bowels of the paper layers. Therefore, it is imperative to consider how to properly make corrugated paper roses with sweets, especially since there is a lot of such information on the network.
First alignment example roses, corrugated paper candies with hands into a single craft is very simple. To do this, you need to cut a few petals, but first make a candy base. In such crafts, it is best, more convenient, to work with a hot glue gun, since the surface of candy wrappers is very often poorly glued in other ways. You need to fix the candy inside the petals, wrapping them around in a sufficient number of layers. Tie the base with a thread, decorate it with paper on top, but first insert a wooden skewer inside with a drop of glue at the end to securely fix the stem, and only then you can wrap it with green strips and attach the leaves.
For each petal, you need a narrow strip that is glued along the narrow bottom edge. This is how the paper is fixed, wrapping around a wooden skewer with candy pre-fixed on it. It's so very simple and quick, in just a few minutes, you will get all the components for a festive composition. You can place them in the same way as living ones - place them in a small wicker basket filled with foam or a sponge, or you can wrap them in wrapping paper, a net, so that it resembles a bouquet of fresh flowers as much as possible.
Corrugated paper rose candies, master class which we offered you above, will surely give joy and a lot of positive impressions to any person to whom you give them.
